Receiving a station through a list— LIST

You can list up the frequency or the name. For details on labeling a station, see page 10.

1Select the band, then press (LIST).

The frequency or station name appears.

2Press M or m repeatedly until the desired station appears.

3Press (ENTER) to receive the station.

Other functions

Changing the sound settings

Adjusting the sound characteristics

You can adjust the bass, treble, balance, fader and subwoofer volume.

1Select a source, then press (SOUND) repeatedly to select the desired item.

The item changes as follows:

BASS (bass) t TREBLE (treble) t BALANCE (left-right) t

FADER (front-rear) t SUB (subwoofer volume)*

*“ ∞” is displayed at the lowest setting, and can be adjusted up to 20 steps.

2Press < or , repeatedly to adjust the selected item.

After 3 seconds, the setting is complete and the display returns to normal play/reception mode.

Note

Adjust within 3 seconds of selecting the item.

Adjusting the equalizer curve— EQ7 Tune

You can adjust and store the equalizer settings for different tone ranges.

1Select a source, then press (MENU).

2Press M or m repeatedly until “EQ7 Tune” appears, then press (ENTER).

3Press < or , repeatedly to select the desired equalizer type, then press

(ENTER).

4Press < or , repeatedly to select the desired frequency.

The frequency changes as follows:

62Hz y 157Hz y 396Hz y 1.0kHz y 2.5kHz y 6.3kHz y 16kHz

5Press M or m repeatedly to adjust the desired volume level.

The volume level is adjustable in 1 dB steps, from –10 dB to +10 dB.

continue to next page t

9