Receiving the stored stations
1 Press (SOURCE) repeatedly to select the radio.
2 Press (MODE) repeatedly to select the desired band.
Radio reception of the desired band starts.
Operation by the card remote commander:
To
Stop radio | Press (OFF). |
reception |
|
|
|
Receive stored | Press (1) to (6). |
stations | Press M/m |
– Preset search | [until the desired station]. |
|
|
Search stations | Press </, |
– Automatic tuning [until the desired station].
Specify | Press </, |
frequencies | [hold until the desired |
– Manual tuning | frequency]. |
| |
Operation by the main unit: | |
To |
|
|
|
Stop radio | Press (OFF). |
reception |
|
|
|
Receive stored | Rotate the R dial |
stations | [until the desired station]. |
– Preset search |
|
|
|
Search stations | Press (ENTER) once, then |
– Automatic tuning rotate the R dial* | |
| [until the desired station]. |
|
|
Specify | Press (ENTER) twice, then |
frequencies | rotate the R dial |
– Manual tuning | [until the desired |
| frequency]. |
|
|
*To stop searching, rotate the R dial in the reverse direction.
Tip
If automatic tuning stops too frequently, set “Local” in “PlayMode” to “ON.” Only the stations with relatively strong signal will be tuned in (Local seek mode).
If FM stereo reception is poor
—Mono
Set “Mono” in “PlayMode” to “ON.”
The sound improves, but becomes monaural.
To restore stereo reception, set to “OFF.”
Note
If interference occurs, this unit will automatically narrow the range of reception frequency to eliminate noise (IF Auto function). In such cases, some FM stereo broadcasts may become monaural while in the stereo reception mode.
Tips
•To always hear FM stereo broadcasts in stereo, set “IF Switch” in “PlayMode” to “WIDE.” Note that some interference may occur in this setting.
For details, see “PlayMode menu” on page 38.
•If FM broadcasts are difficult to hear, set “DSO” in “Sound” to “OFF” (page 30).
Storing only desired stationsYou can manually preset the desired stations on any chosen preset memory.
1 Press (SOURCE) repeatedly to select the radio.
2 Press (MODE) repeatedly to select the desired band.
3 Press < or , to tune in the station that you want to store.
4 Press the desired number button ((1) to (6)) for 2 seconds until “Memory” appears.
The number of the button you pressed is displayed, and then the selected station is assigned to this number and stored.
Note
If you try to store another station on the same stored number, the previously stored station will be erased.
20