— Aspect
You can deform or clip out images to fit the screen size with the aspect ratio selected.
1 Press (MENU).
2 Press < or , repeatedly to select “Display,” then press (ENTER).
3 Press < or , repeatedly to select “Aspect,” then press (ENTER).
4 Press < or , repeatedly to select the desired image mode.
Each time you press < or ,, the image type changes as follows:
When “Video full” or “Video & Spectrum Analyzer” is selected.
Standard2 y Standard1 y Wide2 y Wide1 y Cinema2 y Cinema1
When “Video & Capture” or “Video & Slideshow” is selected.
Standard3 y Wide3 y Cinema3
To adjust the image position
Cinema and Wide type images can be scrolled up or down by pressing M or m.
5 Press (MENU).
The display returns to the normal display.
Note
Depending on the selected image mode (aspect ratio), display characters may not be displayed correctly.
Display patterns and image types
The following image types are available depending on the selected display patterns in the Video mode.
When “Video & Spectrum Analyzer” or “Video full” is selected.
Standard1:
An image with an aspect ratio of 4 to 3.
Wide1:
An image with an aspect ratio of 16 to 9.
Cinema1:
An image with an aspect ratio of 2.35 to 1
Standard2:
An image with an aspect ratio of 4 to 3, with only the left and right sides of the image being enlarged to fill the display.
Wide2:
An image with an aspect ratio of 16 to 9, with only the left and right sides of the image being enlarged to fill the display.
26