Radio receptionPreset tuning is not possible.•Store the correct frequency in the memory.•The broadcast signal is too weak.The stations cannot be received. The sound is hampered by noises.

•Connect a power aerial control lead (blue) or accessory power supply lead (red) to the power supply lead of a car’s aerial booster. (Only when your car has built-in FM/AM aerial in the rear/side glass.)

•Check the connection of the car aerial.•The auto aerial will not go up.t Check the connection of the power aerial control lead.•Check the frequency.•When the DSO mode is on, the sound is sometimes hampered by noises.t Set the DSO mode to off (page 21).Automatic tuning is not possible.•The local seek mode is set to “ON.”t Set the local seek mode to “OFF” (page 15).•The broadcast signal is too weak. t Perform manual tuning.The “ST” indication flashes.•Tune in the frequency accurately.

•The broadcast signal is too weak.

t Set the monaural reception mode to “ON” (page 16).A programme broadcast in stereo is heard in monaural.The unit is in monaural reception mode.tCancel monaural reception mode (page 16).

Error displays/Messages

Error displays(For this unit and optional CD/MD changers)

The following indications will flash for about 5 seconds, and an alarm sound will be heard.

BLANK*1No tracks have been recorded on an MD.*2tPlay an MD with recorded tracks on it.ERROR*1•A CD is dirty or inserted upside down.*2 t Clean or insert the CD correctly.•An MD does not playback because of some problem.*2t Insert another MD.•A CD/MD cannot play because of some problem.t Insert another CD/MD.HI TEMPThe ambient temperature is more than 50°C.tWait until the temperature goes down below 50°C.NO DISCNo disc is inserted in the CD/MD unit.tInsert discs in the CD/MD unit.NO MAGThe disc magazine is not inserted in the CD/ MD unit.tInsert the magazine in the CD/MD unit.NO MUSICA CD which is not a music file is inserted in the MP3 playable CD unit.tInsert a music CD in the MP3 playable CD unit.NOT READYThe lid of the MD unit is open or the MDs are not inserted properly.tClose the lid or insert the MDs properly.RESETThe CD/MD unit cannot be operated because of some problem.tPress the RESET button on the unit.

*1 When an error occurs during playback of a CD or MD, the disc number of the CD or MD does not appear in the display.

*2 The disc number of the disc causing the error appears in the display.

continue to next page t

25