To restore the factory-set equalizer curve, press and hold (SEL) before the setting is complete.

After 3 seconds, the setting is complete and the display returns to normal play/reception mode.

With the card remote commander

In step 3, to adjust the selected item, press <, M, , or m.

Labeling a station/disc

When you receive a station, or play a disc in a CD changer with the CUSTOM FILE function, you can label each station/disc with a custom name up to 8 characters (Station Memo/Disc Memo).

If you label a station/disc, the name appears on the list (page 9 or 11).

1While receiving a station or playing a disc that you want to label, press and hold (LIST).

2Press the volume +/– button repeatedly until the desired character appears.

To move the digital indication, press (SEL).

A y B y C ... y 0 y 1 y 2 ... y +

y– y ... y (blank space) y A

Repeat this operation until the entire name is entered.

3Press and hold (LIST).

The labeling is complete and the display returns to normal play/reception mode.

To display the name, press (DSPL) during reception or playback.

Tips

•To correct or erase a character, overwrite or enter “ .”

•The Disc Memo always takes priority over any prerecorded title.

•You can label a disc on the unit if a changer with the CUSTOM FILE function is connected.

•“REP-TRACK” and all shuffle play are suspended until the labeling is complete.

With the card remote commander

In step 2, to select the character, press M or m.

Deleting the custom name

1Select the radio, or the unit that has stored the custom name you want to delete, then press and hold (LIST).

2Press and hold (DSPL). The stored name will flash.

10

3Press the volume +/– button repeatedly to select the name you want to delete.

4Press and hold (SEL).

The name is deleted. Repeat steps 3 and 4 to delete other names.

5Press and hold (LIST).

The unit returns to normal play/reception mode.

With the card remote commander

In step 3, to select the name, press M or m.

Adjusting setup items

—SET

1Press and hold (SEL).

The setup display appears.

2Press (SEL) repeatedly until the desired item appears.3Press the volume +/– button to select the setting (example “ON” or “OFF”).4Press and hold (SEL).

The setup is complete and the display returns to normal play/reception mode.

Note

Displayed items will differ, depending on the source and setting.

With the card remote commander

In step 3, to select the setting, press < or ,.

The following items can be set (follow the page reference for details):

“z” indicates the default settings.

CLOCK-ADJ

(page 4)

(Clock Adjust)

 

 

 

BEEP

To set “BEEP-ON” (z) or

 

“BEEP-OFF.”

 

 

SUB/REAR*1

To switch the audio output.

 

– “SUB” (z): to output to a

 

subwoofer.

 

– “REAR”: to output to a

 

power amplifier.

DIM (Dimmer) To change the brightness of the display.

–“DIM-ON”: to dim the display.

–“DIM-OFF” (z): to deactivate the dimmer.

DEMO*1To set “DEMO-ON” (z) or (Demonstration) “DEMO-OFF” (page 4).

A.SCRL To scroll long displayed items

(Auto Scroll) automatically when the group/ track is changed.

–“A.SCRL-ON”: to scroll.

–“A.SCRL-OFF” (z): to not scroll.