Receiving a station through a list — list-up

You can list up the frequency or the name. For details on labeling a station, see page 10.

1Select the band, then press (LIST).

The frequency or station name appears.

2Press (LIST) repeatedly until the desired station appears.

After 5 seconds, the unit returns to normal reception mode.

3Press (SEEK) +/– to receive the station.

With the card remote commander

In step 2, to select the station, press M or m.

Other functions

Changing the sound settings

Adjusting the sound characteristics — BAL/FAD/SUB

You can adjust the balance, fader, and subwoofer volume.

1Press (SEL) repeatedly until “BAL,” “FAD” or “SUB” appears.

The item changes as follows:

LOW*1 t MID*1 t HI*1 t

BAL (left-right) t FAD (front-rear) t SUB (subwoofer volume)*2

*1 When EQ3 is activated (page 9).

*2 When the audio output is set to “SUB” (page 10).

“ATT” is displayed at the lowest setting, and can be adjusted up to 20 steps.

2Press the volume +/– button repeatedly to adjust the selected item.

After 3 seconds, the setting is complete and the display returns to normal play/reception mode.

Note

Adjust within 3 seconds of selecting the item.

With the card remote commander

In step 2, to adjust the selected item, press <, M, , or m.

Adjusting the equalizer curve

— EQ3

You can adjust and store the equalizer settings for different tone ranges.

1Select a source, then press (EQ3) repeatedly to select the EQ3 type.2Press (SEL) repeatedly until “LOW,” “MID” or “HI” appears.

3Press the volume +/– button repeatedly to adjust the selected item.

The volume level is adjustable in 1 dB steps, from –10 dB to +10 dB.

Repeat steps 2 and 3 to adjust the equalizer curve.

continue to next page t

9