Other Functions
Adjusting the balance and fader
You can adjust the balance and fader.
1 Press (SEL) repeatedly until “BAL” or “FAD” appears.
Each time you press (SEL), the item changes as follows:
LOW* t MID* t HI* t
BAL (left-right) t FAD (front-rear)
*When EQ3 is activated (page 13).
2 Press the volume +/– button to adjust the selected item.
Note
Adjust within 3 seconds after selecting the item.
Quickly attenuating the sound
Press (ATT).
“ATT” appears in the display.
To restore the previous volume level, press (ATT) again.
Changing the sound and display settings
The following items can be set:
•DEMO* — to turn the demonstration display on or off.
–Select “ON” to activate the demonstration display (The demonstration starts about 10 seconds after the unit is turned off).
–Select “OFF” to deactivate the demonstration display.
•BEEP — to turn the beeps on or off.
Selecting the desired item
Press (SEL) and the desired preset number button simultaneously.
(SEL) + (4): DEMO*
(SEL) + (6): BEEP
*When the unit is turned off.
To cancel the item, press (SEL) and the preset number button simultaneously again.
12