Fuse replacement
When replacing the fuse, be
sure to use one matching the |
|
amperage rating stated on the |
|
original fuse. If the fuse |
|
blows, check the power |
|
connection and replace the |
|
fuse. If the fuse blows again |
|
after replacement, there may |
|
be an internal malfunction. In |
|
such a case, consult your | Fuse (10A) |
nearest Sony dealer. |
|
Cleaning the connectors
The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel (page 4) and clean the connectors with a cotton swab dipped in alcohol. Do not apply too much force. Otherwise, the connectors may be damaged.
Main unit | Back of the front panel |
Notes
•For safety, turn off the ignition before cleaning the connectors, and remove the key from the ignition switch.
•Never touch the connectors directly with your fingers or with any metal device.
Removing the unit
1Remove the protection collar.1Detach the front panel (page 4).
2Engage the release keys together with the protection collar.
Orient the release keys as shown.
3Pull out the release keys to remove the protection collar.
2Remove the unit.1Insert both release keys simultaneously until they click.
Hook facing inwards.
2Pull the release keys to unseat the unit.
3Slide the unit out of the mounting.
12