Other functions
Changing the sound settings
Adjusting the sound characteristics — BAL/FAD/SUB
You can adjust the balance, fader and subwoofer volume.
1Press (SEL) repeatedly until “BAL,” “FAD” or “SUB” appears.The item changes as follows:
LOW*1 t MID*1 t HI*1 tBAL
*1 When EQ3 is activated (page 9).
*2 When the audio output is set to “SUB” (page 9). “ATT” is displayed at the lowest setting, and can be adjusted up to 20 steps.
2Press the volume +/– button repeatedly to adjust the selected item.After 3 seconds, the setting is complete and the display returns to normal play/reception mode.
Note
Adjust within 3 seconds of selecting the item.
With the card remote commander
In step 2, to adjust the selected item, press <, M, , or m.
Adjusting the equalizer curve
— EQ3
You can adjust and store the equalizer settings for different tone ranges.
1Select a source, then press (EQ3) repeatedly to select the EQ3 type.2Press (SEL) repeatedly until “LOW,” “MID” or “HI” appears.3Press the volume +/– button repeatedly to adjust the selected item.The volume level is adjustable in 1 dB steps, from
Repeat steps 2 and 3 to adjust the equalizer curve.
To restore the
After 3 seconds, the setting is complete and the display returns to normal play/reception mode.
With the card remote commander
In step 3, to adjust the selected item, press <, M, , or m.
Adjusting setup items
—SET
1Press and hold (SEL).
The setup display appears.
2Press (SEL) repeatedly until the desired item appears.3Press the volume +/– button to select the setting (example “ON” or “OFF”).4Press and hold (SEL).The setup is complete and the display returns to normal play/reception mode.
Note
Displayed items will differ, depending on the source and setting.
With the card remote commander
In step 3, to select the setting, press < or ,.
The following items can be set (follow the page reference for details):
“z” indicates the default settings.
(Clock Adjust) |
|
|
|
BEEP | To set |
| |
|
|
SUB/REAR*1 | To switch the audio output. |
| – “SUB” (z): to output to a |
| subwoofer. |
| – “REAR”: to output to a |
| power amplifier. |
DIM (Dimmer) To change the brightness of the display.
–
–
DEMO*1To set
A.SCRL | To scroll long displayed items |
(Auto Scroll) | automatically when the group/ |
| track is changed. |
| – |
| – |
| scroll. |
|
|
LPF*2 (Low | To select the |
Pass Filter) | “78HZ,” “125HZ” or “OFF” |
| (z). |
|
|
*1 When the unit is turned off.
*2 When the audio output is set to “SUB.”
9