Step 2: Save the update data on storage media
Save the downloaded update data on any of the following types of storage media.
xDisc media such as a CD-R
xUSB mass storage device
Storage media such as a USB flash drive are supported.
xMemory Stick Duo™ and other card-type storage media
If using this type of media, a commercially available card reader/writer (USB connector type) is required.
The amount of free space that is required varies depending on the version of the update data. In general, the storage media must have at least 150 MB or more of free space.
Save the update data according to the instructions below. Using a PC, create a folder named "PS3" on the storage media. Within the "PS3" folder, create a folder named "UPDATE". Save the update data in the "UPDATE" folder.
Storage media | PS3 | UPDATE |
Notice
Be sure to save the update data as noted below. If the data is not saved in the correct way, the PS3™ system will not recognize the update data. The folder name must be in all uppercase letters. Location: Save in the "PS3" folder > "UPDATE" folder
File name: Save as file name "PS3UPDAT.PUP"
Step 3: Install the system software
Notices
•Do not turn off the system or remove the storage media during the installation. If the installation is cancelled before completion, the system software may become damaged, and the system may require servicing or exchange.
•During the installation, the power button on the system front and the PS button on the Wireless Controller are not active.
Turn on the PS3™ system, and then insert the storage media. Follow the
18Reinstalling the system software