Sony CFD-360 operating instructions Setting the clock, 18EN

The Timer

Setting the clock

DISPLAY/ENTER TUNING/TIME SET +/–

CLOCK/TIMER

Before you set the clock, insert four R6 (size AA) batteries and connect the AC power cord (see page 22.)

Before you set the clock, “0:00” flashes.

Tip

The time display system:

24-hour system

1 Press CLOCK/TIMER until “CLOCK” appears in the display.

2 Press CLOCK/TIMER for about 2 seconds until the hour digit flash.

3 Press TUNING/TIME SET +/– until you set the

current hour. Then press DISPLAY/ENTER.

The minute digits flash. Set the minutes by pressing TUNING/TIME SET +/– until the correct minute is displayed.

/

4 Press DISPLAY/ENTER.

The clock starts from 00 seconds.

18EN

The Timer

CFD-360.E.G_3-000-000-1X.CED/CEE/CEK/EE1