The Timer

Setting the clock

“– –:– –” indication appears in the display until you set the clock.

CLOCK/SLEEP/TIMER

ENTER

Jog dial

3 Press ENTER.

The clock starts from 00 seconds.

Tip

The time display system:

CFD-E90: 12-hour system

CFD-E90L: 24-hour system

Timer The

Before you set the clock, connect the power source (see page 23).

1 Hold down CLOCK/SLEEP/TIMER until “CLOCK” appears in the display. The hour digit flashes.

2 Turn the jog dial to set the current hour. Then press ENTER.

The minute digits flash. Set the minutes by turning the jog dial until the correct minute is displayed.

19GB