Troubleshooting (continued)
Tape Player
The tape does not move when you press an operation button.• Close the cassette compartment securely.The REC z button does not function or the tape does not play or record.•Make sure the safety tab on the cassette is in place.The tape does not erase completely.•Clean the erasing head (see page 29).•Replace all the batteries with new ones if they are weak.
•The source which was recorded on TYPE II (high position) or TYPE IV (metal) tape using this unit is being played. Record on TYPE I (normal) tape and play.
The tape does not record.•Make sure the tape is inserted properly.•Make sure the safety tab of the cassette is in place.The audio is weak/The audio quality is poor.•Clean the heads, pinch roller and capstan (see page 29).•Demagnetize the heads using a demagnetizer (see page 29).The sound is distorted.•The TYPE II (high position) or TYPE IV (metal) tape is being used. Use TYPE I (normal) tape only.
Remote
The remote does not function.•Replace all the batteries in the remote with new ones if they are weak.•Make sure that you are pointing the remote at the remote sensor on the player.•Remove any obstacles in the path of the remote and the player.•Make sure the remote sensor is not exposed to strong light such as direct sunlight or fluorescent lamp light.
•Move closer to the player when using the remote.After trying the above remedies, if you still have problems, unplug the mains lead and remove all the batteries. After all the indications in the display disappear, plug the mains lead and insert the batteries again. If the problem persists, please consult your nearest Sony dealer.