Creating your own
program (Program Play)
You can arrange the playing order of up to 20 tracks on a CD.
MODE
DISPLAY/
ENTER
MEMORY
Jog dial
u
x
1 Press x.
“CD” appears in the display.
2 Press MODE until “PGM” appears in the display.
To cancel Program Play
Press MODE until “PGM” disappears from the display.
To check the order of tracks before play
Press DISPLAY/ENTER•MEMORY. Every time you press the button, the track number appears in the programed order.
To change the current program
Press xonce if the CD is stopped and twice if the CD is playing. The current program will be erased. Then create a new program following the programing procedure.
When playing MP3 files
•In TRACK mode, you can program up to 20 files the same as you would for audio CD tracks.
•In FOLDER mode, you can program up to 20 folders and play all tracks in the programmed folder in the programmed order.
3 Turn the jog dial to select the track you want to program, and press DISPLAY/ ENTER•MEMORY.
Repeat this step.
Programed track | Playing order |
4 Press uto start program play.
On the remote
1 Press x.
2 Press MODE until “PGM” appears in the display.
3 Press the number buttons for the tracks you want to program in the order you want.
4 Press N.
Programed folder Playing order
Tips
•You can play the same program again, since the program is saved until you open the CD compartment.
•You can record your own program. After you’ve created the program, insert a blank tape and press zto start recording.
•The resume function doesn't work during Program Play.
18