
Specifications
AUDIO POWER SPECIFICATIONSPOWER OUTPUT AND TOTAL HARMONIC DISTORTION
With
System
Compact disc digital audio system Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV) Number of channels
2 Frequency response
20 - 20 000 Hz
Below measurable limit
Radio sectionFrequency range
FM: 87.6 - 108 MHz
AM: 530 - 1 710 kHz
Antennas
FM: Telescopic antenna
AM:
Recording system
Approx. 120 sec. with Sony cassette
TYPE I (normal): 70 - 13 000 Hz
GeneralSpeaker
Full range: 10 cm (4 in.) dia.,
3.2Ω , cone type (2)
Outputs
Headphones jack (stereo minijack) For 16 - 68 Ω impedance headphones
Power output
2.3W + 2.3 W (at 3.2 Ω , 10 % harmonic distortion)
Power requirements
For CD radio
9 V DC, 6 size D (R20) batteries For memory
6 V DC, 4 size AA (R6) batteries For remote control:
3 V DC, 2 size AA (R6) batteries Power consumption
AC 20 W
Battery life
For CD radio
FM recording
Sony R20P: approx. 15 h
Sony alkaline LR20: approx. 40 h
Tape playback
Sony R20P: approx. 10 h
Sony alkaline LR20: approx. 25 h
CD playback
Sony R20P: approx. 1.5 h
Sony alkaline LR20: approx. 6 h
Dimensions
Approx. 420 ⋅ 161 ⋅ 266 mm (w/h/d)
(16 5⁄8 ⋅ 6 3⁄8 ⋅ 10 1⁄2 inches) (incl. projecting parts)
Mass
Approx. 4.6 kg (10 lb. 2 oz) (incl. batteries) Supplied accessories
AC power cord (1) Remote control (1)
Design and specifications are subject to change without notice.
Optional accessoriesSony MDR headphones series
29