Sony CFD-V15, CFD-V24, CFD-V14 Choosing the power sources, Tip, Tip, AC IN, Setting Up, Up Setting, To a wall outlet, Battery compartment, Connecting the AC power cord

Setting Up

Choosing the power sources

You can use the AC power or batteries as a power source.

Use the AC power source whenever you record since recording consumes much power.

AC INBattery compartment

Up Setting

To a wall outlet

Tip

Only for the customers supplied with an AC plug adaptor:

Use the supplied AC plug adaptor if the plug of the AC power cord does not match your outlet.

Tip

Replace the batteries when the OPR/BATT indicator dims or when the player stops operating. Replace all the batteries with new ones. Before you replace the batteries, be sure to take out the CD from the player.

Connecting the AC power cord

Insert one end of the supplied AC power cord to the AC IN socket located at the rear of the player, and the other end to the wall outlet.

Adjusting the voltage (only for the models equipped with the VOLTAGE SELECTOR at the bottom )

Be sure to set the VOLTAGE SELECTOR (at the bottom) to your local power supply.Using the player on batteriesInsert six R20 (size D) batteries (not supplied) into the battery compartment.To use the player on batteries, disconnect the AC power cord from the player.

Setting Up 17EN