Tips
•To exit the standby
mode, press STANDBY
to make the 
indication disappear from the display.
•The preset settings remain until you reset them.
6 Set the volume by turning PRESET•TIME SET, then DSPL ENT MEM.
7 Press STANDBY. |
| ||
| |||
The | |||
The | indication lights up and the power goes off. | ||
| |||
At the preset time, the power will go on, and the | Timer | ||
music will play. Then the power will go off at the | |||
| |||
preset time, and the player will enter into the standby mode.
To check/change when the playback will start
Press TIMER , then DSPL ENT MEM. Each time you press DSPL ENT MEM, a stored setting is displayed in the set order. To change the setting, display the setting you want to change and
To use the player before a timer playback starts
Just turn on the player, and then you can use it.
If you turn off the player before the preset time, timer playback will start at the preset time.
In case of the radio, however, if you listen to the station which is different from the one you tuned in in step 1 on page 22, you will hear that station at the preset time. Make sure to tune in the station you want to listen to before you turn off the player.
To stop play
Press POWER to turn off the power.
The Timer 23