Listening to the radio

— Preset Tuning

Presetting radio stations in the system’s memory in advance makes it easy to tune in those stations later (see “Step 3: Presetting radio stations” on page 9).

To turn on the system, press ?/1.

?/1

(Power)

1 3

2

STEREO/

MONO

VOL +/

To

Do this

Turn off the radio

Press ?/1.

 

 

Adjust the volume

Press VOL +/–.

 

 

To tune in a non-preset radio station

In step 2, press TUNING MODE repeatedly until “MANUAL” appears, then press +/– repeatedly to tune in the desired station (Manual Tuning).

Tips

If you press TUNER/BAND when the power is off, the system automatically turns on and tunes in the station last received (One Touch Play).

To switch to the radio while listening to another source, press TUNER/BAND (Automatic Source Selection).

If there is static during an FM broadcast, press STEREO/MONO until “MONO” appears. The broadcast will no longer be in stereo, but the reception will improve. Press this button again to restore the broadcast to stereo.

For better reception, remove the rear cover and place the antenna outside (see “To remove the AM antenna” on page 6).

1 Press TUNER/BAND repeatedly until “FM” or “AM” appears.

2 Press TUNING MODE repeatedly until “PRESET” appears.

3 Press +/– repeatedly to display the preset number of the desired station.

3 1005

Frequency

Preset number

16