![](/images/backgrounds/18902/18902-405x1.png)
2Fasten the four screws to both sides of the unit.
+ –
3Attach the speakers.
Facing the front of the unit, attach the speaker connected to the SPEAKER R terminals onto the right side of the unit and the speaker connected to the SPEAKER L terminals onto the left side of the unit.
Afterwards, push down on the speakers to make sure they are securely fastened to the unit.
+ –
3For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage.
VOLTAGE SELECTOR |
| ||
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
4After making sure that the cords are correctly and securely connected,
reinstall the rear cover.
Pass the speaker cords through the holes on | Getting | |
both sides of the rear cover. | ||
| ||
U | Started |
5Turn the unit upside down while holding the glass door firmly with your hand, then set the speaker cord into the groove at the bottom of the unit.
*
*This groove is used to hold the power cord when the optional stand is attached.
continued5