![](/images/backgrounds/18902/18902-404x1.png)
Getting Started
Step 1: Hooking up the system
Follow steps 1 through 6 of the procedure below to hook up your system using the supplied cords and accessories.
The speaker grille design differs somewhat from that of the U.S. and other models. The U.S. model is used here for illustration purposes.
Right speaker | Left speaker |
Rear cover
1 4
2 ![](/images/backgrounds/18902/18902-404xi3.png)
![](/images/backgrounds/18902/18902-404xi4.png)
U ![](/images/backgrounds/18902/18902-404xi6.png)
![](/images/backgrounds/18902/18902-404xi7.png)
![](/images/backgrounds/18902/18902-404xi8.png)
![](/images/backgrounds/18902/18902-404xi9.png)
5 | 3 |
| 6 |
1Remove the rear cover.
U
Push in on the tabs, pull downward, and then lift off
2Connect the speakers.
1Connect the right and left speaker cords to the SPEAKER terminals as shown below.
3 Gray (3)
L
#
Black (#) #
R
3
Insert this portion
Note
Keep the speaker cords away from the antennas to prevent noise.
4