To prevent a tape from being accidentally recorded over, break off the cassette tab from side A or B as illustrated.
Break off the cassette tab of side A
If you later want to reuse the tape for recording, cover the broken tab with adhesive tape.
Before placing a cassette in the tape deckTake up any slack in the tape. Otherwise the tape may get entangled in the parts of the tape deck and become damaged.
When using a tape longer than 90 minutesThe tape is very elastic. Do not change the tape operations such as play, stop, and
Clean the tape heads after every 10 hours of use. Make sure to clean the tape heads before you start an important recording or after playing an old tape. Use separately sold
Demagnetize the tape heads and the metal parts that have contact with the tape every 20 to 30 hours of use with a separately sold demagnetizing cassette. For details, refer to the instructions of the demagnetizing cassette.
Specifications
Amplifier sectionAUDIO POWER SPECIFICATIONS: (U.S.A. model only)POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
with 4 Ω loads both channels driven, from 120
-10,000 Hz; rates 6 W per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 mW to rated output.
Canadian model:Continuous RMS power output (reference) 6 + 6 W
(4 Ω at 1 kHz, 10% THD)
European model:DIN power output (rated) 4.5 + 4.5 W
(4 Ω at 1 kHz, DIN)
Continuous RMS power output (reference) 6 + 6 W
(4 Ω at 1 kHz, 10% THD)
Music power output (reference)
13 + 13 W
Other model:The following measured at AC 230 V or AC 120 V, 50/60 Hz
DIN power output (rated) 4.5 + 4.5 W
(4 Ω at 1 kHz, DIN)
Continuous RMS power output (reference) 6 + 6 W
(4 Ω at 1 kHz, 10% THD)
Outputs |
|
PHONES: | Accepts headphones of |
(stereo mini jack) | 8 Ω or more |
SPEAKER: | Accepts impedance of 4 to |
| 16 Ω |
| CD player section |
|
System | Compact disc and digital |
| audio system |
Laser | Semiconductor laser |
| (λ =780 nm) |
| Emission duration: |
| continuous |
Frequency response | 20 Hz - 20 kHz (±0.5 dB) |