Programing the CD tracks

— Program Play

You can make a program of up to 28 tracks in the order you want them to be played.

1 Press CD (CD/REMAIN on the remote), then place a CD.

2 Press ENTER/PGM (TUNER MEM/ ENTER/PGM on the remote) repeatedly until “00 PR.01” appears in the display.

3 Turn ./>clockwise or counterclockwise (or press .or > on the remote) until the desired track appears in the display.

Programed step number

Selected track number (including selected track)

4 Press ENTER/PGM (TUNER MEM/ ENTER/PGM on the remote).

The track is programed. The next program step number appears, and “PROGRAM” flashes.

5 To program additional tracks, repeat steps 3 to 4.

6 Press u.

Program Play starts.

To

Do this

Check the total

Press ENTER/PGM (TUNER

number of

MEM/ENTER/PGM on the remote)

programed

repeatedly in stop mode. Each time

tracks

you press the button, the selected

 

track number and the programed

 

step number appear in the display

 

in turn.

 

 

Cancel Program

Press xtwice until “PROGRAM”

Play

disappears from the display. The

 

program you made will be erased.

 

 

Tip

The program you made remains after Program Play finishes. When Program Play remains in the system’s memory, “PROGRAM” flashes. To play the same program again, press CD (CD/REMAIN on the remote) and ENTER/PGM (TUNER MEM/ENTER/ PGM on the remote), then press u.

CD

9GB