Waking up to music

— Daily Timer

You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the clock” on page 5).

1 Prepare the sound source you want to play.

CD: Load a disc. To start from a specific track, make a program (see “Creating your own program” on page 7).

TAPE: Load a tape.

TUNER: Tune in a radio station (see “Listening to the radio” on page 9).

2 Press CLOCK/TIMER SET.
3 Press ./> repeatedly until “PLAY” appears, then press CLOCK/ TIMER SET.

“ON TIME” appears and the hour indication flashes.

4 Set the time to start playback.

Press ./> repeatedly to set the hour, then press CLOCK/TIMER SET.

The minute indication flashes.

Press ./> repeatedly to set the minute, then press CLOCK/TIMER SET.

5 Set the time to stop playback following the same procedure as step 4.
6 Press ./> repeatedly depending on the sound source you want to play.

Each time you press the button, the display changes cyclically as follows:

CD t TAPE t TUNER

7 Press VOL +/– repeatedly (or turn VOLUME on the unit) to adjust the volume.
8 Press ?/1 to turn off the system.

Other operations

To

Do this

Check or change

Turn on the system and then

the setting

start over from step 1 when the

 

c DAILY indicator appears.

 

 

Activate the timer

Press CLOCK/TIMER

 

SELECT repeatedly until

 

“PLAY” appears, then press

 

CLOCK/TIMER SET.

 

 

Cancel the timer

Press CLOCK/TIMER

 

SELECT repeatedly until

 

“OFF” appears, then press

 

CLOCK/TIMER SET.

 

 

Notes

If you use the Daily Timer and the Sleep Timer at the same time, the Sleep Timer has priority.

Do not operate the system from the time the system turns on until the play starts (about 15 seconds before the preset time).

If the system is on about 15 seconds before the preset time, the Daily Timer will not be activated.

You cannot use the optional component connected to MD IN jacks as sound sources for the Daily Timer.

14GB