Press ENTER on the remote.
TUNER t RECORD (tuner) t CD TAPE t TUNER t …
The TIMER indicator lights up.
t
Set the starting time.
Press CLOCK/TIMER SET on the remote repeatedly until “SET TMR” appears, then press ENTER on the remote.
“ON” appears, and the hour indication flashes.
6
Press CLOCK/TIMER + or – on the remote repeatedly to set the hour, then press ENTER on the remote.
The minute indication begins flashing next.
Press CLOCK/TIMER + or – on the remote repeatedly to set the minute, then press ENTER on the remote. The hour indication flashes again.
4 Set the time to stop the playback following the procedure in step 3.
5 Press CLOCK/TIMER + or – on the remote to select the desired sound source.
The indication changes as follows:
3
2
Waking up to music
— Daily Timer
You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the clock”on page 7).
1 Prepare the sound source you want to play.
• CD: Place a CD.
• Tape: Insert a tape with the side you want to play on facing towards you.
• Radio: Tune in the preset station you want (see “Listening to the radio” on page 11).
7 Press CLOCK/TIMER + or – on the remote to adjust the volume, then press ENTER on the remote.
The start time, the stop time, and the sound source appear in turn, before the original display returns.
8 Press ?/1 to turn off the system.
To | Do this |
Check or change | Turn on the system and then |
the setting | start over from step 1 when the |
| TIMER indicator appears. |
|
|
Activate the timer | Press CLOCK/TIMER ON/OFF |
operation | on the remote until the TIMER |
| indicator goes on. |
|
|
Cancel the timer | Press CLOCK/TIMER ON/OFF |
| on the remote until the TIMER |
| indicator goes off. |
|
|