The station is stored.
Press ENTER.
4
5 Repeat steps 1 to 4 to store other stations.
Setting presets through automatic tuning
1 Press TUNER (TUNER/BAND on the remote) repeatedly to select “FM” or “AM”.
2 Turn and hold TUNING +/– (or press and hold TUNING + or TUNING – on the remote) until the frequency indication starts to change, then release it. Scanning stops automatically when the system tunes in a station. “STEREO” (for a stereo program) appears.
If the scanning doesn’t stop
Set the frequency of the desired radio station as described in steps 2 through 5 of “Setting presets through manual tuning”.
3 Press TUNER MEM (TUNER MEMORY on the remote).
The preset number starts flashing.
The stations are stored from preset number 1.
Preset number
Tuner
Presetting radio stations
You can preset up to 30 stations for FM and AM. You can then tune in any of those stations simply by selecting the corresponding preset number.
There are two ways to store the station presets.
To | Method |
Automatically tune all of the | Automatic Tuning |
stations that can be received in | Preset |
your area and then store them |
|
manually |
|
|
|
Manually tune and store the | Manual Tuning |
radio frequency of your | Preset |
favourite stations |
|
|
|