Listening to the radio (continued)
Listening to non-preset radio station
— Manual Tuning

1 Press TUNER (TUNER/BAND on the remote) repeatedly to select “FM” or “AM”.

2 Turn and hold TUNING +/– (or press and hold TUNING + or TUNING – on the remote) repeatedly to tune in the desired station.

Tips

To improve FM broadcast reception, adjust the antennas.

To improve AM broadcast reception, adjust the antenna (for CMT-EP505) or reorient the main unit itself (for CMT-EP404).

You can change the display into the clock display (for five seconds) by pressing DISPLAY.

Using the Radio Data

System (RDS)

(CMT-EP505, European model only)
What is the Radio Data System?

Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. This tuner offers convenient RDS features like station name display and location of stations by program type. RDS is available only on FM stations.*

Note

RDS may not work properly if the station you are tuned in is not transmitting the RDS signal properly or if the signal strength is weak.

*Not all FM stations provide RDS service, nor do they provide the same types of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area.

Receiving RDS broadcasts

Simply select a station from the FM band. When you tune in a station that provides RDS services, “RDS” appears in the display.

To check the RDS information

Each time you press DISPLAY, the display changes as follows:

Frequency t RDS name* t RDS TEXT*

tRDS type* t Clock display (for five seconds) t Frequency t ...

*If the RDS broadcast is not received, the RDS name, RDS TEXT and RDS type may not appear in the display.

12GB