Load a recorded tape. Press TAPE.

Tape

Loading a tape

1 Press TAPE.2 Press Z PUSH OPEN/CLOSE.3 Insert a tape in deck with the side youwant to play/record facing forward.

Insert with the side you want to play/

record facing forward.

Playing a tape

You can use TYPE I (normal), TYPE II (CrO2) or TYPE IV (metal) tape.

1

2

3 Press RDS/DIR (PLAY MODE/RDS/DIR on the rmote) repeatedly to select g to play one side, hto play both sides, or j* to play both sides repeatedly.

*The tape automatically stops after playing back five times.

4 Press nN.Press nN again to play the reverse side.

To

Press

Stop play

x

 

 

Pause

X

 

Press again to resume play.

 

 

Fast-forward or rewind

With the tape stopped, press

 

. m/M >

 

 

Remove the cassette

Z PUSH OPEN/CLOSE

 

 

Finding the beginning of a track (AMS*)

During playback, press . m or M >.

The tape is wound or rewound to the beginning of the next or current track, and play will start automatically. The search direction, “+” (forward) or “–” (back), and “1” appear in the display.

* AMS (Automatic Music Sensor)

Tip

You can change the display into the clock display (for five seconds) by pressing DISPLAY.

Note

The AMS function may not operate correctly under the following circumstances:

When the unrecorded space between tracks is less than 4 seconds long.

If completely different information is recorded on the left and right channels.

When there are continuous sections of extremely low level or low frequency sound (like those of a baritone sax).

When the system is placed near a television. (In this case, we recommend moving the system farther away from the television or turning off the television.)

Tape

13