Teac CR-H227I owner manual Repeat Playback CD/MP3/WMA

Repeat Playback (CD/MP3/WMA)

Repeat Playback

Each time the REPEAT 1/ALL button is pressed, the mode is changed as follows:

When a CD is loaded:

Repeat 1 Repeat All

Play (off)

When an MP3/WMA disc is loaded.

Repeat 1 RPT Folder Repeat All

Play (off)

<If one of the following buttons is pressed, repeat mode will be canceled:

STOP, SOURCE (AUX, TUNER, TAPE, iPod),

BAND, OPEN/CLOSE, STANDBY/ON

Repeat one track (Repeat 1)

The track being played will be played repeatedly. If you press the SKIP button (.or/) and select another track, the track you selected will be played repeatedly.

It is also possible to select a track to be repeated in the stop mode. Press the REPEAT 1/ALL button and select a track using the numeric buttons.

Repeat all the tracks in the folder (RPT Folder) (MP3/WMA only)

All the tracks in the folder will be played repeatedly.

<This mode is not available in the stop mode.

<When the disc has no folder, this mode will be skipped.

Repeat all the tracks (Repeat All)

All the tracks will be played repeatedly.

During programmed playback, programmed tracks will be played repeatedly.

A-B Repeat Playback

This function allows repeat playback of any desired portion of the disc.

1.Designate the point at which repeat playback should start by pressing the A-B button. “Repeat A-” lights up and “B” blinks.

2.When the point at which repeat playback should end is reached, press the A-B button again.

“Repeat A-B” lights up.

The designated point with A-B button will be played back repeatedly.

<To return to normal play, press A-B button until “Repeat A-B” disappears from the display.

<There must be more than 3 seconds between A and B.

29