Teac CR-H227I owner manual Setting the Timer, Press the TIME MODE button twice

Setting the Timer

ENTER SKIP

TIME MODE

Setting the Timer

<The unit can be programmed to turn on and off at a specified time.

<Adjust the clock before setting the timer.

<When no action is taken for 1 minute, the timer setting mode will be cancelled.

1Press the TIME MODE button twice.

“On time” appears on the display, and the “hour” value blinks.

2Press the SKIP buttons to set the start time (hour), and press the ENTER button.

The “minute” value blinks.

3Press the SKIP buttons to set the start time (minute), and press the ENTER button.

“Off time” appears on the display, and the “hour” value blinks.

4Press the SKIP buttons to set the stop time (hour), and press the ENTER button.

The “minute” value blinks.

5Press the SKIP buttons to set the stop time (minute), and press the ENTER button.

“Source select” appears on the display.

6Press the SKIP buttons to select a source, and press the ENTER button.

Now the timer setting is stored in memory.

40