Teac CR-H227I owner manual Getting started with iPod, Compatible iPod Software

Getting started with iPod

The CR-H227i comes mounted with an adapter for iPod with color display (40GB, 60GB), “60GB (color) + Photo 40GB/60GB”. To play your iPod through the CR-H227i, you have first to check if the factory mounted adapter fits your model of iPod. If it does not, you have to replace it with a correct one, as explained below.

1.Remove the adapter from the Dock of the CR- H227i.

Hold the left and right sides of the adapter and gently pull it up.

2.Choose the Dock adapter that fits your iPod mobile digital device.

“Video 30GB” for iPod with video (30 GB).

“Video 60GB/80GB” for iPod with video (60 GB, 80 GB).

“nano” for iPod nano.

“mini” for iPod mini.

“20GB (color) + Photo 30GB” for iPod with color display (20GB, 30GB, U2 Special Edition).

“60GB (color) + Photo 40GB/60GB” for iPod with color display (40GB, 60GB).

“20GB + U2” for iPod with Click Wheel (20 GB, U2 Special Edition).

“40GB” for iPod with Click Wheel (40 GB).

<Use a commercially available adapter to play iPod with dock connector (with four buttons under the display).

3.Insert the adapter into the Dock of the CR- H227i.

Fit the front edge of the adapter into the Dock, and then press the back edge of the adapter onto the Dock until a slight “click” is heard indicating the adapter is inserted correctly.

1

2

<When you need to remove the adapter, hold the left and right sides of the adapter and gently pull it up.

<When you don’t use the Dock, use the supplied cover for the Dock to prevent dust from settling on the Dock.

Compatible iPod Software

In case your iPod will not work with the CR-H227i or with the remote control unit, software update may solve the problem.

Visit the Apple website and download the latest iPod Software.

iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.

22