Teac CR-H227I owner manual To skip to the next or a previous track, Search for a part of a track

Listening to iPod 2

Display mode (Video output from iPod)

When the iPod is docked, press and hold the MENU button for more than 3 seconds to select which display to be used.

Extended mode (default)

Select this to use the display of the CR-H227i. Information on the audio files is displayed on the display of the CR-H227i.

The screen of the iPod shows TEAC logo.

<No signal is output from the S-VIDEO and VIDEO terminals.

Click Wheel Mode

Select this to use the screen of the iPod. Menu appears on the screen of the iPod.

The display of the CR-H227i constantly shows “Clickwheel Mode”.

<When the Dock is connected to a TV or monitor, select “Click Wheel Mode” to output video signals.

<Following buttons on the main unit don’t work in the Click Wheel mode:

PLAY, PAUSE, SKIP

To skip to the next or a previous track

During playback, press the SKIP button (. or /) repeatedly until the desired track is found. The selected track will be played from the beginning.

<When the . button is pressed during playback, the track being played will be played from the beginning. To return to the beginning of the previous track, press the . button twice.

Search for a part of a track

During playback, hold down the SEARCH button (m or ,) of the remote control unit (or the SKIP button of the main unit) for more than 2 seconds and release it when the part you want to listen to is found.

24