Teac CR-H227I owner manual IPod Dock, Video OUT terminal, Headphones, To disconnect the Dock

FiPod Dock

Connect the Dock to the iPod port.

<Make sure the label side of the plug is up.

<Securely insert the plug until a slight “click” is heard.

To disconnect the Dock:

Squeeze both sides of the plug and pull.

label side

GVIDEO OUT terminal

This terminal outputs video signal from iPod.

Use an RCA (pin) video cable to connect the Dock to the composite video connector of a television or monitor.

<Select “Click Wheel Mode” to output video signal (see page 24).

HS-VIDEO OUT terminal

This terminal outputs video signal from iPod.

Use an S-Video cable to connect the Dock to the S-Video input of a suitably equipped television or monitor. Use this connection in preference to a composite video connection.

<Select “Click Wheel Mode” to output video signal (see page 24).

IAUX 3 IN

You can connect a portable audio player to this jack.

Connect the LINE OUT or PHONES jack (audio output jack) of the player using a commercially available stereo mini plug cable.

<When using the PHONES jack of your mini player, you must adjust the volume of the mini-player or you may hear no sound from your CR-H227i.

JHeadphones

For private listening, insert the headphones plug into this jack, and adjust the volume by turning the VOLUME knob.

11