Sony CMT-EP515 Presetting radio stations, Tuner, 3 Press TUNER MEMORY, Automatic tuning preset, 1 Press TUNER BAND repeatedly to select FM or AM

Other operations

To	Do this
Cancel Program	Press PLAY MODE/
Play	DIRECTION in stop mode
	repeatedly until both “PGM” and
	“SHUFFLE” disappear.
Add a track to the	Perform steps 1 – 4 in stop mode.
end of the program
Erase the program	Press CLEAR in stop mode.
	Each time you press the button, a
	track is cleared from the end of
	the program.

Tip

The program you made remains after Program Play finishes. To play the same program again, press CD N. However, the program is cleared when you open the lid of the CD compartment.

Tuner

Presetting radio stations

You can preset up to 32 stations for FM and AM. You can then tune in any of those stations simply by selecting the corresponding preset number.

Automatic tuning preset

You can automatically tune in all of the stations that can be received in your area and then store the radio frequency of the desired stations.

1 Press TUNER BAND repeatedly to select FM or AM.

2 Press and hold TUNING +/– until the frequency indication starts to change, then release it.

Scanning stops automatically when a station is tuned in. At that time, “TUNED” and “STEREO” (for stereo program only) appear.

If “TUNED” does not appear and the scanning does not stop

Set the frequency of the desired radio station as described in steps 2 through 4 of “Manual tuning preset” (page 9).

3 Press TUNER MEMORY.

The preset number appears. Station storage starts with preset number 1. If preset stations have been erased, then stations are stored to the lowest preset number containing no station.

Preset number

4 Repeat steps 1 through 3 to preset other stations.

8GB