Playing repeatedly
— Repeat Play
You can play all the tracks or a single track on a disc repeatedly.
Press REPEAT repeatedly during playback until “REP” or “REP 1” appears.
REP: For all the tracks on the disc up to five times.
REP 1: For a single track only.
To cancel Repeat Play
Press REPEAT repeatedly until both “REP” and “REP 1” disappear.
Note
When you select “REP 1”, that track is repeated endlessly until “REP 1” is canceled.
Creating your own program
— Program Play
You can make a program of up to 25 steps. You can synchro record the programmed tracks onto a cassette tape (page 20).
Using the remote
1 Press CD (or FUNCTION repeatedly) to switch the function to CD.
2 Press PLAY MODE repeatedly in stop mode until “PGM” appears.
3 Press . or > repeatedly until the desired track number appears.
When programming the tracks on the ATRAC CD or MP3 CD, press 
+ or – repeatedly to select the desired group, then press . or > repeatedly until the desired track number appears.
Selected track number | Total playing time |
4 Press ENTER.
The track is programmed.
The program step number appears, followed by the last programmed track number and total playing time.
5 To program additonal tracks, repeat steps 3 and 4.
6 Press N (or CD NX on the unit).
Program Play starts.