Completely disconnect the power cord (mains lead) from the wall socket (mains) if it is not going to be used for an extended period of time. When unplugging the unit, always grip the plug. Never pull the cord itself.
Should any solid object or liquid get into the system, unplug the system, and have it checked by qualified personnel before operating it again.
The AC power cord can be changed only by a qualified service facility.
On placementDo not place the system in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light.
Be careful when placing the unit or speakers on surfaces that have been specially treated (for example, with wax, oil, polish) as staining or discoloration of the surface may result.
If the system is brought directly from a cold to a warm location or is placed in a very damp room, moisture may condense on the lens inside the CD player, and cause the system to malfunction. In this situation, remove the disc, and leave the system turned on for about an hour until the moisture evaporates.
On heat buildupHeat buildup on the unit during operation is normal and is not cause for alarm.
Do not touch the cabinet if it has been used continuously at a high volume because the cabinet may have become hot.
Do not obstruct the ventilation holes.This speaker system is not magnetically shielded, and the picture on nearby TV sets may become magnetically distorted. In this situation, turn off the TV, wait
15 to 30 minutes, and turn it back on. If there is no improvement, move the speakers far away from the TV.
Cleaning the cabinetClean this system with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or alcohol.