To disconnect the USB cable

For Windows 2000/Windows Me/ Windows XP

If [USB MODE] appears on the LCD screen, follow the procedure below to disconnect the USB cable.

1Click the [Unplug or eject hardware] icon on the task tray.

Click this icon.

•If your computer has a USB keyboard and a USB mouse as standard equipment, leave them connected and connect the camcorder to an available USB jack with the USB cable (supplied).

task tray

2Click [Safely remove Sony Camcorder] ([Unplug or eject hardware] in Windows 2000/Windows Me).

Click here.

3Click [OK] in Windows 2000/Windows Me.

4Disconnect the USB cable from the camcorder and computer.

If [USB MODE] does not appear on the LCD screen, do only step 4 above.

For Windows 98/Windows 98SE

Do only step 4 above.

bNotes

•Do not disconnect the USB cable while the access lamp is lit.

•Make sure to disconnect the USB cable (supplied) before turning off your camcorder.

Recommended connection

Connect as shown in the following illustrations to operate the camcorder correctly.

•Connect the camcorder to a computer via the USB cable (supplied). Make sure no other USB devices are connected to the computer.

bNotes

•Operation is not guaranteed if you connect two or more USB devices to the computer.

•Operation is not guaranteed if you connect the USB cable to the USB jack on a keyboard or USB hub.

•Make sure to connect the cable to the USB jack on the computer.

•Operation is not guaranteed on all the recommended environments.

Using the i.LINK cable (optional)

to i.LINK (IEEE1394) connector

i.LINK cable (optional)

to DV Interface

,continued

computer Windows a to Connecting

Connecting to a Windows computer 15