For touch panel models
Select [CANCEL] on the LCD screen of your camcorder.
For SEL/PUSH EXEC dial models
Press BURN DVD/VCD of your camcorder.
bNotes
•You cannot cancel the operation after [Finalizing DVD.] is displayed on the LCD screen of your camcorder.
•Do not disconnect the i.LINK cable or set the POWER switch to another mode on your camcorder until the picture is completely copied to the computer.
•The DVD is created even if you disconnect the i.LINK cable (optional) or turn off the power of your camcorder while [WRITING] or [CONVERTING] is displayed.
•When any of the following occurs, copying of the picture is canceled. A DVD containing the data up to the point the operation was canceled is created. Refer to the help files of “Click to DVD Automatic Mode Launcher” for details.
–When there is a blank portion of 10 seconds or longer on the tape.
–When the data of the tape contains a date before the recording date of the later images.
–When normal and wide size pictures are recorded on the same tape.
–When [A/V t DV OUT] in the menu settings of your camcorder is set to on.
•You cannot operate your camcorder in the following situations:
–While playing back a tape
–While recording images onto a “Memory Stick”
–When “Click to DVD” is started up from the computer
•You may not be able to create a DVD from an 8mm tape if it contains pictures recorded in a format other than Digital 8 format.
32Other functions