Customizing Your Monitor
3Press the ¬./>buttons to select the color temperature.
There are two color temperature modes in the OSD. The preset adjustments are 9,300K and 5,000K.
Selecting your own color temperature between 9,300K and 5,000K
Press the ¬./>buttons to select “ 
(VARIABLE)” and adjust by pressing the >?//buttons.
COLOR
9300K
5000K
50
VARIABLE
/. . . for a higher temperature (bluish) ?. . . for a lower temperature (reddish)
The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again.
To reset, press the RESET button while the OSD is on. The selected color temperature is reset to the factory settings.
Using the SCREEN On-screen Display
Adjust convergence settings to eliminate red or blue shadows that may appear around objects on the screen. Adjust the CANCEL MOIRE function to eliminate wavy or elliptical lines that may appear on the screen.
Once the setting is adjusted, it will be stored in memory for all input signals received.
1Press the MENU button.
The MENU OSD appears.
MENU
2Press the ¬./>and >?//buttons to select “ 
SCREEN,” and press the MENU button again.
The SCREEN OSD appears.
SCREEN
26
H CONVERGENCE
3Press the ¬./>buttons to select the item you want to adjust.
Select | To | ||||
|
|
|
| adjust the horizontal convergence | |
|
|
|
| ||
H CONVERGENCE | |||||
| |||||
|
|
|
|
| |
|
|
|
| adjust the vertical convergence | |
V CONVERGENCE | |||||
| |||||
|
|
|
|
| |
|
|
|
| eliminate elliptical or wavy lines on | |
CANCEL MOIRE | the screen | ||||
|
| ||||
* | adjust the degree of moire | ||||
MOIRE ADJUST | cancellation | ||||
|
|
|
|
| |
*CANCEL MOIRE must be “ON” for “
(MOIRE ADJUST)” to appear on the screen.
12