Getting Started

Connecting Your Monitor’s Speaker

You can listen to music, sounds, and other audio files using the speaker in your monitor.

Connect the AUDIO IN jack to the audio out jack of your computer’s sound card using the miniplug cord (supplied).

 

AUDIO

 

IN

AUDIO IN jack

2 Headphones jack

3Press the >?//buttons to adjust the volume.

The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again.

To reset, press the RESET button while the OSD is on.

To mute the sound

Press the MUTING button.

No sound comes from the speaker.

The mark appears at the bottom of the screen.

MUTING

Adjusting the sound

1Press the MENU button.

The MENU OSD appears.

MENU

OK MENU

EN

To cancel, press the MUTING button again.

MENU

COLOR CENTER SCREEN

GEOM EXIT ZOOM

Using the headphones jack

You can listen to the audio signals from your computer

SOUND SIZE OPTION

2Press the ¬./>and >?//buttons to select “ª

SOUND,” and press the MENU button again.

The SOUND OSD appears.

SOUND

26

Note

While muting the sound, the mark appears in the SOUND OSD

instead of the çmark. Increase the volume to cancel the mark and activate the speaker.

using headphones (not supplied). The speaker turns off when headphones are connected to the headphones jack. Adjust the volume using the SOUND OSD.

Note

If the volume from the speaker is too low, increase the output level (average of 500 mv) of the computer.

7