Customizing Your Monitor
Changing the on-screen display position
You can change the OSD position (for example, when you want to adjust the picture behind the OSD).
1Press the MENU button.
The MENU OSD appears.
MENU
2Press the ¬./>and >?//buttons to select “ 
OPTION,” and press the MENU button again.
The OPTION OSD appears.
OPTION
ON
MANUAL DEGAUSS
3Press the ¬./>buttons to select “ 
(OSD H
POSITION)” or “ 
(OSD V POSITION).”
Select “ 
(OSD H POSITION)” to adjust the horizontal position.
OPTION
OSD H POSITION
Select “ 
(OSD V POSITION)” to adjust the vertical position.
OPTION
OSD V POSITION
4Press the >?//buttons to move the OSD to the desired position.
The OPTION OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
To reset, press the RESET button while the OSD is on.
Locking the controls
The control lock function disables all of the buttons on the front panel except the u(power) switch and MENU button.
1Press the MENU button.
The MENU OSD appears.
MENU
2Press the ¬./>and >?//buttons to select “ 
OPTION,” and press the MENU button again.
The OPTION OSD appears.
OPTION
ON
MANUAL DEGAUSS
3Press the ¬./>buttons to select “
(CONTROL
LOCK).”
OPTION
OFF ON
CONTROL LOCK
4Press the >?//buttons to select “ON.”
The OPTION OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
Once you select “ON,” you cannot select any items except “EXIT” and “ 
OPTION” in the MENU OSD.
If you press any button other than the u(power) switch and
MENU button, the 
mark appears on the screen.
To cancel the control lock
Repeat steps 1 through 3 above and press the >?// buttons to select “OFF.”
14