Enlarging or reducing the picture (ZOOM)

This setting is stored in memory for the current input signal.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button to highlight SIZE or CENTER and press the center of the control button again.

The SIZE/CENTER menu appears on the screen.

3Move the control button m/M to select (zoom), and move </, to enlarge or reduce the picture.

Notes

•Adjustment stops when either the horizontal or vertical size reaches its maximum or minimum value.

•The horizontal adjustment value is not displayed in the menu.

Adjusting the shape of the picture (GEOM)

The GEOM settings allow you to adjust the rotation and shape of the picture.

The (rotation) setting is stored in memory for all input signals. All other settings are stored in memory for the current input signal.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button to highlight GEOM and press the center of the control button again.

The GEOMETRY menu appears on the screen.

3First move the control button m/M to select the

desired adjustment item. Then move the control button </, to make the adjustment.

Select To

rotate the picture

expand or contract the picture sides

shift the picture sides to the left or right

adjust the picture width at the top of the screen

shift the picture to the left or right at the top of the screen

Adjusting the color of the picture (COLOR)

The COLOR settings allow you to adjust the picture’s color temperature by changing the color level of the white color field. Colors appear reddish if the temperature is low, and bluish if the temperature is high. This adjustment is useful for matching the monitor’s colors to a printed picture’s colors.

This setting is stored in memory for all input signals.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button to highlight COLOR and press the center of the control button again.

The COLOR menu appears on the screen.

3Move the control button m/M to select a color temperature.

The preset color temperatures are 5000K and 9300K. Since the default setting is 9300K, the whites will change from a bluish hue to a reddish hue as the temperature is lowered to 5000K.

4If necessary, fine tune the color temperature.

You can select your own color temperature between 9300K

and 5000K.

First move the control button m/M to select . Then move the control button </, to adjust the color temperature.

COLOR

9 3 0 0 K

5 0 0 0 K

2 6

Adjusting the convergence (CONV)

The CONV settings allow you to adjust the quality of the picture by controlling the convergence. The convergence refers to the alignment of the red, green, and blue color signals.

If you see red or blue shadows around letters or lines, adjust the convergence.

These settings are stored in memory for all input signals.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button to highlight CONV and press the center of the control button again.

The CONVERGENCE menu appears on the screen.

3First move the control button m/M to select for

horizontal adjustment, or for vertical adjustment. Then move the control button </, to adjust the convergence.

10