Adjustments

Navigating the menu

1 Press the MENU button to display the main menu.

EX I T

,

45

1 2 8 0 x 1 0 2 4 / 8 5 H z

Main Sub menu menu

The horizontal frequencies/resolution

The vertical

of the current input signal (only if the

frequencies

signal matches to one of this monitor’s

of the current

factory preset modes)

input signal

2Move the control button m/M to highlight the main menu you want to adjust and press the control button.

S I ZE / CENTER

, ,

45

1 2 8 0 x 1 0 2 4 / 8 5 H z

Main Sub menu menu

3Move the control button m/M to highlight the sub menu you want to adjust. Then move the control button –/+ to make adjustments.

To close the menu

Press MENU button twice to return to the main menu. The default-

selected item is . Each time you select and press MENU button, the menu exits. If no buttons are pressed, the menu closes automatically after about 30 seconds.

Adjusting the brightness and contrast

Brightness and contrast adjustments are made using a separate BRIGHT/CONTRAST menu. These adjustments are effective for all input signals.

1Move the control button M ()/m () to display the

BRIGHT/CONTRAST menu.

2Move the control button m/M to select the brightness

() or contrast (). Then move the control button –/+ to make adjustments.

BR I GHT / CONTRAST

BR I GHTNESS

45

1 2 8 0 x 1 0 2 4 / 8 5 H z

Note

If you selected the sRGB mode in the (COLOR MODE) of the

(COLOR) menu, the / (BRIGHT/CONTRAST) menu for the sRGB mode appears and you cannot adjust the brightness nor the contrast on this screen. For more information about using the sRGB mode, see sRGB mode

in the (COLOR) menu.

4