Sony CPD-G420S Setup, Step 1:Connect your monitor to your computer, xConnecting to an IBM PC/AT or compatible computer, qa Speaker, 9i Headphone jack

82 VOL (volume) control dial (page 8)

This dial controls the volume of the sound from the AUDIO IN jack.

9i Headphone jack

This stereo headphone jack is provided for convenient silent listening in the office or at home.

q; AUDIO IN jack (page 8)

For sound, connect your computer or audio/video equipment with this jack.

qa Speaker

This hidden monaural speaker is mounted behind the

2VOL (volume) control dial on the rear of the monitor.

Setup

Before using your monitor, check that the following accessories are included in your carton:

•Power cord (1)

•Audio cord (stereo miniplug) (1)

•Warranty card (1)

•Notes on cleaning the screen’s surface (1)

•This instruction manual (1)

Step 1:Connect your monitor to your computer

Turn off the monitor and computer before connecting.

Notes

•Do not touch the pins of the video signal cable connector as this might bend the pins.

•When connecting the video signal cable, check the alignment of the HD15 connector. Do not force the connector in the wrong way or the pins might bend.

xConnecting to an IBM PC/AT or compatible computer

AC IN

2 1

to video output

IBM PC/AT or compatible computer

6