Example of System Setup

To use the CD-R/RW device, the following components are required:

•Computer (IBM-PC/AT, HP Vectra, or equivalent)

•IDE Host adapter (ATA compliant)

•Floppy disc drive

•IDE Interface cable (40 to 40 pin flat cable)

•Software (Device driver, utilities)

Installing the Drive in Your Computer

This section provides an example of instruction for installing the CD-R/RW drive unit into your personal computer using the IDE Host Adaptor (ATA-Compliant).

To connect the CRX100E directly to the PC’s IDE port, consult your PC manufacturer for instruction.

Preparation

You need the following parts and tools (these are not supplied with the drive):

•A flat-blade screwdriver

•Four screws 3 mm in diameter and 6 mm in length.

•Two mounting rails if your computer has mounting tracks.

Unplug the computer and disconnect the cables attached to the back to give yourself more room to work. Do not turn on the power of the computer before completing the entire installation process.

10 Example of System Setup / Installing the Drive in Your Computer