Precautions

•Do not use or keep the Cyber-shot Station in locations subject to the following conditions:

–Locations with extremes of temperature

In closed automobiles during summer, the ambient temperature may be very hot, causing deformation or malfunction of the Cyber-shot Station.

–Locations in direct sunlight or near heaters

This may cause deformation or malfunction of the Cyber-shot Station.

–Locations subject to vibration

–Locations subject to strong magnetism

–Locations subject to dust or sand

If you use the Cyber-shot Station, for example, on a beach or in a desert, make sure that you keep the Cyber-shot Station away from sand. The Cyber-shot Station that is covered with sand may malfunction.

•Do not use the Cyber-shot Station in locations that are subject to strong radio waves or radiation. Images may not be played back properly.

Notes on using the Cyber-shot Station

•Do not connect the supplied USB cable to the multi connector on the bottom of the camera. This may cause a malfunction of the multi connector.

• Be sure to connect the USB cable to the (USB) jack on the back of the Cyber- shot Station.

•Use caution when removing the AC adaptor.

•When you disconnect the cable, do not grasp the cable itself.

•Do not bend the cable or add stress to it.

Charging the battery

For the full performance of the battery pack, we recommend that you charge it at temperatures between 10 °C and 30 °C (50 °F and 86 °F).

Care and maintenance

Clean the Cyber-shot Station with a soft cloth slightly moistened with water, then wipe the surface with a dry cloth. Do not use any type of solvent such as thinner, alcohol or benzine as this may damage the surface.

6-GB