Symptom

Cause/Solution

The connection between the printer and the Cyber-shot Station cannot be established

•The printer may not be PictBridge-compliant. tAsk the printer manufacturer whether your

printer is PictBridge-compliant.

•The printer is not set for the connection with the camera.

tBe sure that the printer is on to connect with the camera.

Unable to print images

• The Cyber-shot Station is not connected to the

 

printer properly.

 

tCheck that the Cyber-shot Station and the

 

printer are properly connected using the USB

 

cable.

 

• The camera is not placed on the Cyber-shot Station

 

correctly.

 

tPlace the camera correctly.

 

• The printer is not turned on.

 

tTurn on the printer.

 

For further infomation, refer to the operating

 

instructions supplied with the printer.

 

• Movies cannot be printed.

 

• Still images modified with a computer or still

 

images taken using other than the camera

 

compatible with this Cyber-shot Station may not

 

be able to be printed.

Printing is canceled

• You disconnected the USB cable before the

 

mark disappeared.

•You removed the camera from the Cyber-shot

Station before the mark disappeared.

The CHARGE lamps light up when no camera is placed on the Cyber-shot Station

•When the camera was not placed on the Cyber- shot Station, you have pressed the Control buttons (in the order of v/b/V/B), then pressed the POWER button and now the Cyber-shot Station is in the demonstration mode.

tTo cancel the demonstration mode, discconect the AC adaptor once and connect it again. Alternatively, place the camera on the Cyber- shot Station.

Unable to shoot an image when pressing the SHUTTER button

• The AC adaptor is disconnected.

tConnect the AC adaptor properly.

•The camera is turned off. tTurn on the camera.

•The camera is not set to the Shooting mode. tSet the Shooting mode.

For further infomation, refer to the operating instructions supplied with the camera.

Unable to start the interval shooting

• The AC adaptor is disconnected.

 

tConnect the AC adaptor properly.

 

• The interval selector is not set correctly.

 

tSet the interval selector correctly.

Interval shooting is continuously working even when “Memory Stick” is full

•Interval shooting automatically work up to 12 times. When the “Memory Stick” is full, still images will not be recorded.

14-GB