Troubleshooting

Symptom

Cause and/or corrective actions

Playback starts from the

c The resume function is working. To start playing from the first

point you stopped. (resume

track, press and hold the jog lever during stop until the first track

function)

starts playing, or open the lid of the CD player. Or, remove all

 

power sources, then insert the batteries or connect the AC power

 

adaptor again. (pages 7, 8, 19, 22)

Rustling noise is heard from

c Close the lid of the battery compartment firmly. (page 19)

the CD.

 

When closing the lid of the CD player, the CD starts to rotate.

cThe CD player is reading the information on the CD. It is not malfunctioning.

You cannot operate the CD

c The buttons on the CD player are kept pressed by mistake.

player properly using the

 

remote control.

 

The LCD display becomes hard to see or slows down.

cYou are using your CD player at high temperatures (above 40°C/ 104°F) or at low temperatures (below 0°C/32°F). At room temperature, the display will return to its normal operating condition.

” is flashing quickly in the display, and you cannot locate the beginning of the track or the specific point in the track.

cThe CD player has entered the Bookmarked track play mode.

Press P MODE/ twice so that the player returns to the normal play mode.

28