BConnecting to a power source

You can check the remaining power of the batteries in the display.

ttttt

Lobatt*

* Beep sounds.

When the batteries are depleted, charge the rechargeable batteries or replace the dry batteries with new ones.

•Using the rechargeable batteries (this page)

•Using the dry batteries (external battery case) (page 35)

Notes

•

The indicator sections of

roughly show the

 

remaining battery power. One section does not

 

always indicate one-fourth of the battery power.

•

Depending on operating conditions, the indicator

 

sections of

may increase or decrease.

•When using the rechargeable batteries and dry batteries together to extend power, use a fully charged rechargeable batteries and new dry batteries.

For the battery life and charging time of the rechargeable batteries, see “Specifications.”

Using the rechargeable batteries

Charge the rechargeable batteries before using them for the first time. To keep the original battery capacity for a long time, charge the batteries only when it is completely depleted. You can use only the following rechargeable batteries for your CD player.

•NH-10WM (supplied)

•NH-14WM (not supplied)

1 Slide OPEN to open the lid of your CD player, then open the battery compartment lid inside the player.

2 Insert rechargeable batteries by matching the 3 to the diagram in the battery compartment and close the lid until it clicks into place.

Insert the # end first (for both batteries).

(Continued)

to Connecting

power a source

33