Preparing a Power Source
Use only the following batteries for your player.
Rechargeable batteryCharge the rechargeable battery (not supplied) before using it for the first time or when it is depleted. To maintain the original battery capacity longer, charge the battery only when it is completely depleted (“Low Battery” appears on the display).
•
Be sure to remove the AC power adaptor when using the dry battery. Replace the battery with new one when the battery is depleted.
•LR6 (size AA) alkaline battery (not supplied)
1Squeeze the OPEN switch from both sides to open the lid of your player.3Insert the battery by matching the to the diagram in the battery compartment and close the lid until
it clicks into place.Insert the
end first.Getting Started
Charging the rechargeable battery
1Connect the AC power adaptor to the DC IN 3V jack of your player and an AC outlet. Press /CHARGE to start charging.
The player charges the battery. “Charging” flashes and the OPERATION lamp lights up on the player, and the indicator
sections of (battery) light up on the display in succession as charging progresses.
to an AC outlet AC power adaptor
OPEN switch
2Open the battery compartment lid inside the player.Raise |
Battery |
to DC IN 3V
/CHARGE
OPERATION lamp
compart- | Press |
| |
ment lid |
|
When the battery is completely charged, the OPERATION lamp goes off and “Charging” disappears.
Continued