BConnecting to a power source
You can use the following power sources:
•AC power adaptor (see “Playing an audio CD or ATRAC3plus/ATRAC3/MP3 files”)
•Rechargeable batteries
•LR6 (size AA) alkaline batteries
For the battery life, see “Specifications.”
Using the batteries
Use only the following batteries for your CD player.
Rechargeable batteries (not supplied)
Charge the rechargeable batteries before using them for the first time.
•
Dry batteries
• LR6 (size AA) alkaline batteries
To insert the batteries
1 Open the battery compartment lid inside your CD player.
2 Insert two batteries by matching the 3 to the diagram in the battery compartment and close the lid until it clicks into place.
Insert # end first (for both batteries).
To charge the rechargeable batteries (not supplied)
1Connect the AC power adaptor to the DC IN 4.5 V jack of your CD player and an AC outlet.
2Press x/CHARGE to start charging. The CD player charges the batteries. The
indicator sections of light up in succession and “Charging” appears in the display. When the batteries are completely charged, “Charging” and the
indicator get turned off.
If you press x/CHARGE after the charge |
| |
has already been completed, the | Connectingtoa | |
indicator flashes and “FULL” appears in | ||
| ||
the display. |
| |
3 Disconnect the AC power adaptor. |
| |
To remove the batteries | sourcepower | |
Remove the batteries as illustrated below. | ||
|
(Continued)